Main functions

Main functions
The colors on the display reflect the UniFlash mode of operation:


<MODE>    Setting mode

DONE    Setting confirmation

b 999    Bank, erasure protection enabled

SELECT    Confirmed bank selection

PC-UNI    UniFlash-PC communication mode

b 001    Bank, erasure protection disabled

FLOPPY    Synthesizer’s own floppy disk drive in use


The number of the databank is shown on the display and is selected by the buttons. The FLOPPY option stands for UniFlash operation in conjunction with the synthesizer’s floppy disk drive. The numbers 001...ХХX represent the databanks (virtual diskettes) available. The right button increments the databank number, while the left one decrements it. The 1 button increments the databank number in tens and the 2 one decrements in tens. A simultaneous depression of the right and left buttons or depression of the extreme right button (5) results in transition to the FLOPPY mode. The SELECT message means that the selection is accepted. The blinking display indicates access to the memory card.

  
The UniFlash device is provided with the bank data protection feature against accidental erasure. A bank can be protected from the unit or with the 2AVCom Host software (See: 2AVCom Host Software Installation and Operation). A protected databank is highlighted by the blue background, while an unprotected one with the red color. To unprotect a databank, press and hold down the left and right buttons at a time until a PrNO message appears.


bXXX
PrYS2
PrYS1
Pr NO
b XXX


To protect a databank against accidental erasure, press and hold down the left and right buttons at a time until a PrYES message appears.


b XXX
PrNO2
PrNO1
PrYES
b XXX


In case of an attempted access to a protected databank, the bPROT message comes up.


b PROT
b XXX

← Back to Section